ABB PFEA113-20

Technical Specifications

• Measurement Range:
  • 0–10 bar to 0–1000 bar (customizable for specific applications).
  • ±0.1% accuracy over the full scale (including linearity, hysteresis, and repeatability) .
• Input/Output:
  • 4–20 mA current output with HART protocol for digital communication.
  • 0–10 VDC voltage output (optional).
  • 2-wire or 3-wire configuration compatible with standard industrial wiring .
• Power Supply:
  • 12–36 V DC (loop-powered for 4–20 mA models).
  • ≤10 mA power consumption under full load .
• Physical Dimensions:
  • 115 mm (height) × 75 mm (width) × 90 mm (depth).
  • Weight: 0.8 kg (stainless steel housing with IP65/IP67 protection) .
• Environmental Ratings:
  • Operating temperature: -40°C to +85°C (extended industrial range).
  • NEMA 4X/IP67 protection against dust, water ingress, and corrosion .
  • Compliance with EN 61000-6-2/4 for EMC immunity and emissions .
• Material Compatibility:
  • Wetted parts: 316L stainless steel, Hastelloy C-276, or tantalum (optional).
  • Seals: Viton, EPDM, or Kalrez for chemical resistance .

Functional Features

1. Precision Measurement:
   • Digital signal processing with temperature compensation for stable readings in fluctuating environments.
   • Peak hold and minimum/maximum tracking for process optimization .
2. Diagnostics & Safety:
   • Self-diagnostic firmware detects sensor drift, circuit faults, and cable breaks.
   • SIL 2-compliant (IEC 61508) when paired with safety-certified control systems .
   • HART communication enables remote configuration and diagnostic monitoring via ABB Ability™ System 800xA .
3. Modular Design:
   • Field-replaceable sensor module reduces downtime during maintenance.
   • Configurable damping (0.1–30 seconds) to filter noise in high-vibration environments .
4. Cybersecurity:
   • TLS 1.2 encryption for secure HART communication.
   • ISA Secure certification for industrial-grade protection against cyber threats .
5. Calibration:
   • Factory-calibrated with NIST-traceable certificates.
   • Field calibration via HART handheld or ABB’s Prowire+ software .

Application Scenarios

1. Process Industries:
   • Chemical Manufacturing: Monitors reactor pressure during polymerization and distillation processes.
   • Oil & Gas: Ensures safe operation of pipelines, wellheads, and refinery distillation columns .
2. Power Generation:
   • Steam Turbines: Measures steam pressure for efficiency optimization and load balancing.
   • Hydroelectric Plants: Monitors penstock pressure to prevent cavitation and turbine damage .
3. Water/Wastewater Treatment:
   • Pump Stations: Controls pressure in distribution networks to prevent pipe bursts.
   • Reverse Osmosis Systems: Maintains optimal pressure for membrane filtration .
4. Manufacturing:
   • Hydraulic Systems: Ensures consistent pressure in presses, injection molding machines, and robotics.
   • Food & Beverage: Monitors pasteurization and bottling line pressures for quality control .

Key Benefits

• Reliability:
  • MTBF >500,000 hours under rated conditions.
  • Dual-sealed housing and redundant diaphragms eliminate single points of failure .
• Energy Efficiency:
  • Low-power design reduces energy consumption by 15% compared to legacy sensors.
  • Supports IEC 61850-90-7 for interoperable energy management .
• Cost Savings:
  • Hot-swap capability reduces maintenance downtime by 50%.
  • Self-diagnostic features minimize unplanned outages .
• Future-Proofing:
  • Backward compatibility with ABB Symphony Plus and 800xA systems.
  • Field-upgradable firmware for protocol updates and new feature integration .

Compliance & Certifications

• Safety: SIL 2 (IEC 61508), UL 61010-1, CSA C22.2.
• EMC: EN 61000-6-2 (industrial immunity), EN 61000-6-4 (emissions).
• Environmental: RoHS 2011/65/EU and REACH SVHC compliant.
• Cybersecurity: ISA Secure certification for industrial-grade protection .

Typical Use Case

• PFEA113-201 monitors pressure in a distillation column to maintain optimal separation of crude oil fractions.
• HART communication sends real-time data to the ABB 800xA DCS for closed-loop control of reflux valves.
• Result: Reduced energy consumption by 8% and improved product purity by ±0.5% .

Installation Notes

• Cabling: Use shielded twisted-pair cables for 4–20 mA signals to minimize interference.
• Mounting: Install vertically with the process connection at the bottom to prevent condensate buildup.
• Cybersecurity: Enable TLS encryption for HART communication and restrict unused ports .
• Torque Specs: Tighten process connections to 30–40 N·m to prevent leaks.

Discover our other products
KEBA KEBA Control cabinet
KEBA VAISALA SENSOR SYS HMT3301A0B105K EBA100A0AAAAAA 1 / HMT3301A0B105K EBA100A0AAAAAA 1
KEBA VAISALA SENSOR SYS HMT3301A0B032K EBA100A0AAAAAA 1 / HMT3301A0B032K EBA100A0AAAAAA 1
KEBA VAISALA SENSOR SYS HMT3301A0B031K EBA100A0AAAAAA 1 / HMT3301A0B031K EBA100A0AAAAAA 1
KEBA VAISALA SENSOR SYS HMT3301A0B034K EBA100A0AAAAAA 1 / HMT3301A0B034K EBA100A0AAAAAA 1
KEBA VAISALA SENSOR SYS HMT3301A0B035K EBA100A0AAAAAA 1 / HMT3301A0B035K EBA100A0AAAAAA 1
KEBA VAISALA SENSOR SYS HMT3301A0B103K EBA100A0AAAAAA 1 / HMT3301A0B103K EBA100A0AAAAAA 1
KEBA VAISALA SENSOR SYS HMT3301A0B102K EBA100A0AAAAAA 1 / HMT3301A0B102K EBA100A0AAAAAA 1
KEBA VAISALA SENSOR SYS HMT3301A0B104K EBA100A0AAAAAA 1 / HMT3301A0B104K EBA100A0AAAAAA 1
KEBA VAISALA SENSOR SYS HMT3301A0B033K EBA100A0AAAAAA 1 / HMT3301A0B033K EBA100A0AAAAAA 1